Description
Mipa Bumper Paint is a one-component textured coating to repair bumpers, trim strips, exterior mirrors etc. and to paint commonly used plastic substrates in the automotive industry Direct adhesion on cleaned and sanded plastic parts made of ABS, ABS-PC, PP-EPDM, PUR-RIM, PUR, hard PVC.
About this product
Fast drying and easy application as well as good weather resistance are the characteristics of this product. Temperature-resistant up to 70 °C.
What is this product used for?
This product is intended for professional coating work on cars, plastic parts, ABS, and PP with a grey finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Mipa Thinner UN where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Highlights
- Textured coating
- Finish / colour: grey
- Size / content: 1 l
- Suitable for: cars, plastic parts, ABS, and PP
- Fast drying
Technical details
| Product type | Textured coating |
| Size / content | 1 l |
| Finish / colour | grey |
| Suitable for | cars, plastic parts, ABS, and PP |
| Thinner | Mipa Thinner UN |
| Pot life | Spray / processing viscosity: |
| Processing conditions | from +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| Storage | at least 3 years in unopened original container |
| VOC | EU limit value for this product (category B / e): 840 g / l This product contains max. 539 g / l of VOC |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
