Mipa silicone remover in liquid or spray format removes grease, wax and silicone before sanding or matt black coating.
Matt black detail parts
A matt black detail part needs a clean surface, even sanding and a finish that stays visually uniform. The aim is a flat black appearance without shiny patches, sanding marks or mismatched gloss around small edges.
Mipa silicone remover in liquid or spray format removes grease, wax and silicone before sanding or matt black coating.
MP Sanding Pad helps dull the surface evenly on small detail parts before primer, matt colour or spray finish.
Mipa Rallye black matt 2K-HS acrylic ready-mixed colour gives a uniform matt black finish for durable exterior or detail paintwork.
Mipa Paint Spray RAL COLOR matt 400 ml gives a practical 1K matt aerosol method for small parts and quick detail coating.
Mipa 2K-MS Hardener MS 25 normal and Mipa 2K Thinner Short V 10 belong only with compatible Mipa systems where those components are specified.
Mipa 2K Clearcoat Spray high gloss incl. hardener is for detail work where a glossy protected clear finish is intended rather than a preserved matt effect.
Remove contamination before sanding so grease or silicone does not remain below the matt finish.
Sand the part evenly and avoid polishing one area smoother than another, because matt finishes show surface inconsistency quickly.
Use the 2K matt black method for a stronger mixed coating, or the matt aerosol method for compact small part work.
Build the matt finish evenly and avoid wet heavy areas that can create gloss variation or texture differences.
Let the coating cure before handling and clean matt parts later with products that do not add gloss.
Use Mipa Rallye black matt when the final appearance should remain uniformly flat and durable.
Use Mipa Paint Spray RAL COLOR matt when the job is small and an aerosol matt colour is the practical format.
Use high gloss 2K clearcoat only when the design calls for gloss over the black detail, because gloss clear changes the matt appearance.
Spray a small hidden area or test piece first when gloss level matters, because matt black appearance depends strongly on film build, drying and surface preparation.
© 2026 All Rights Reserved.