Mipa silicone remover in liquid or spray format removes grease, fingerprints and outdoor grime before sanding or coating.
Guided small exterior metal coating
Bicycle racks, mailboxes and sign frames need a clean, keyed and weather resistant coating because they are exposed outdoors and touched regularly.
Mipa silicone remover in liquid or spray format removes grease, fingerprints and outdoor grime before sanding or coating.
MP Fine sanding pad helps key old paint and reach around tubes, mailbox edges and sign frame corners.
Mipa EP 100-20 with Mipa EP 950-25 hardener and Mipa EP Thinner gives bare or repaired metal a 2K epoxy primer stage.
Mipa PU 250-50 in price groups I, II and III creates the semi gloss colour finish, used with Mipa PUR Plus Hardener A60 net and Mipa 2K Thinner Normal V 25.
Mipa Mix PU 250 2K Paint Spray 48+ is useful for mailboxes, small frames, narrow tubes and local touch up areas.
Remove dirt first, then degrease the bicycle racks, mailboxes and sign frames with Mipa silicone remover so sanding dust and grease do not stay under the coating.
Key sound paint, feather damaged edges and remove loose rust or peeling coating until the remaining surface is firm.
Use the specified primer stage on exposed metal and let it dry according to the technical information before the next layer.
Apply the semi gloss polyurethane colour in controlled coats, keeping edges, welds, corners and underside returns covered.
Allow the coating to harden before assembly, handling or outdoor exposure, especially on parts that will be touched or cleaned often.
Mipa EP 100-20 under Mipa PU 250-50 is the stronger method for bicycle racks and larger sign frames.
Mipa Mix PU 250 2K Paint Spray 48+ is practical for mailboxes, small frames and narrow parts.
Outdoor pieces need extra attention on edges, screw holes and undersides where water can remain after rain.
Remove numbers, reflectors, plastic flags and fixing caps before coating mailboxes or sign frames so the finish line stays neat.
© 2026 All Rights Reserved.