Clamp with wing screw is a spare part for the MP rotating paint stand MultiSprayStand. It helps hold parts securely on the stand so panels, small components and prepared pieces can be positioned more safely during coating, drying or handling.
A worn, missing or damaged clamp can make a rotating stand less useful. Replacing the clamp restores the fixing point and helps keep the stand ready for regular use. The wing screw allows hand tightening, making setup quicker without needing a separate tool for every adjustment.
The clamp is intended for the MultiSprayStand setup and should be checked against the stand before ordering. It is a practical replacement part when the stand itself remains usable but the fixing hardware needs renewal after repeated handling, overspray exposure or storage damage.
Install the clamp on the correct section of the stand and tighten the wing screw by hand until the part is secure. Do not overtighten against delicate pieces. Check that the coated part is stable before rotating or moving the stand, especially when the part has fresh paint or primer on it.
Fit the clamp to the correct section of the MultiSprayStand, position the part and tighten the wing screw carefully. Check stability before moving or rotating the stand.
| Item type | Spare clamp with wing screw |
|---|---|
| Compatibility | MP rotating paint stand MultiSprayStand |
| Main use | Part fixing on the stand |
| Article number | 551014008 |
|---|
No. It is a spare clamp with wing screw for the MP MultiSprayStand.
A secure clamp helps the stand hold parts more reliably during preparation and coating steps.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
