Description
Its special formulation provides adhesion to even the most challenging substrates without prior sanding.
Product information
It can be used on steel, aluminium (also polished or anodized), zinced substrates, stainless steel (also polished), non-ferrous metals (also polished), chromed substrates, powder coatings and cathodic dip coatings. Time saving results can be achieved since the material is fast drying, recoatable and the fact that there is no sanding required.
Where does this product work best?
Use this clearcoat as the final transparent layer over compatible colour coats when a colourless look is required. The listed application areas include zinced substrates, steel, aluminium, and GRP.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with ready for use where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure sufficient ventilation
Highlights
- Primer
- Finish / colour: colourless
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: zinced substrates, steel, aluminium, and GRP
- Fast drying
Technical data
| Product type | Primer |
| Size / content | 1 l |
| Finish / colour | colourless |
| Pack information | 6 x 1 l |
| Suitable for | zinced substrates, steel, aluminium, and GRP |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure sufficient ventilation |
| Storage | At least 3 years in closed original Containers. Because of the nature of the system, there might be a slight colour change of the product in the container |
| GTIN | 4016176495003 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
