Description
Mipa 2K-HS-Express-Filler FX 4 is a high-quality two-component filler for fast and economic car refinishing (express technology) that generally doesn’t require oven drying. Mipa 2K-HS-Express-Filler FX 4 cures fast already at room temperature (20 °C) and can be sanded after a drying of only 35 minutes (depending on coat thickness and temperature).
Product details
It is therefore possible to save significantly heating-related costs. In the same time, cycle times are reduced since the painting process is not interrupted by heating intervals.
Where does this product work best?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
How to use
Mix the filler with the supplied hardener in the stated ratio (4:1). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Highlights
- Filler
- Finish / colour: grey
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: cars, steel, and aluminium
- Fast drying
Technical data
| Product type | Filler |
| Size / content | 1 l |
| Finish / colour | grey |
| Pack information | 6 x 1 l |
| Suitable for | cars, steel, and aluminium |
| Mixing ratio | 4:1 |
| Hardener | H 5 |
| Thinner | Mipa 2K-Thinner Normal V 25 |
| Pot life | approx. 20 – 30 min at 20 °C Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| GTIN | 4016176606911 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
