Description
Mipa 2K-HS-Express-Filler FX 6 is a high-quality, universally applicable 2K filler for fast and efficient refinishing (express technology) that generally does not require oven drying.
About this product
Thanks to its special formulation, Mipa 2K-HS-Express-Filler FX 6 cures very quickly even at room temperature (20 °C) and can be sanded after only approx. 30 – 40 minutes of drying (depending on humidity, thick layers and temperature).
Where does this product work best?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
How to use
Mix the filler with the supplied hardener in the stated ratio (4:1). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour. From +10 °C and up to 80% relative humidity. Ensure adequate ventilation and air extraction
Features
- Filler
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: galvanised substrates, steel, and aluminium
- GTIN: 4016176709858
Technical data
| Product type | Filler |
| Size / content | 1 l |
| Pack information | 6 x 1 l |
| Suitable for | galvanised substrates, steel, and aluminium |
| Mixing ratio | 4:1 |
| Hardener | H 10 |
| Thinner | Mipa 2K-Thinner |
| Processing conditions | From +10 °C and up to 80% relative humidity. Ensure adequate ventilation and air extraction |
| Storage | At least 3 years in the original sealed container |
| VOC | EU limit for product category B / c 540 g / l. This product contains max. 540 g / l |
| GTIN | 4016176709858 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
