Description
Mipa 2K-Multifiller is a fast drying, multi-purpose sanding and wet-on-wet filler in one. Furthermore, it is possible to overcoat intact, sound cataphoretic coatings without any pre-sanding.
Product information
Mipa 2K-Multifiller can be overcoated without intermediate sanding within 5 days. Universal application: it can be used as sanding filler as well as wet-on-wet filler.
Where does this product work best?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Application notes
Mix the filler with the supplied hardener in the stated ratio (4:1 by weight; 6:1 by volume). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour.
Features
- Filler
- Finish / colour: light grey (approx. RAL 7047)
- Size / content: 1 l, 4 l
- Suitable for: zinced substrates, steel, aluminium, and GRP
- Fast drying
Technical data
| Product type | Filler |
| Size / content | 1 l, 4 l |
| Finish / colour | light grey (approx. RAL 7047) |
| Suitable for | zinced substrates, steel, aluminium, and GRP |
| Mixing ratio | 4:1 by weight; 6:1 by volume |
| Thinner | Mipa 2K-Thinner Normal V 25 |
| Pot life | 1 h with Mipa 2K-Härter H 10 / MS 10 / HS 10 at 20 °C |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
