Description
Mipa Car Tyre Paint Black 1 l is a coating in 1 l format, made for complete or partial coating work where finish and coverage matter. Special paint to recondition unsightly tyres and rubber parts as well as black lettering.
About this product
Prepare the surface correctly, mix or thin the product where required and apply it according to the intended coating process.
Typical applications
This product is intended for professional coating work on cars with a black finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with UN where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Features
- Industrial coating
- Finish / colour: black
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: cars
- GTIN: 4016176012088
Technical data
| Product type | Industrial coating |
| Size / content | 1 l |
| Finish / colour | black |
| Pack information | 6 x 1 l |
| Suitable for | cars |
| Pot life | Spray / processing viscosity: |
| Processing conditions | from +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| Storage | at least 3 years in unopened original container |
| VOC | EU limit value for this product (category B / e): 840 g / l This product contains max. 588 g / l of VOC |
| GTIN | 4016176012088 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
