Description
Mipa E 80 Kaltzinn is a high-quality two-component epoxy body filler with lamellar pigmentation and universal adhesion on iron, steel, aluminium, GRP and wood. Mipa E 80 Kaltzinn is a perfect alternative to the repair by lead loading.
Product information
The product is easy to apply and, after a short drying time, it can be well sanded without producing a lot of dust. It is characterized by its excellent adhesion and bending resistance.
Typical applications
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Application notes
Mix the filler with the supplied hardener in the stated ratio (2:1). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour.
Key features
- Filler
- Size / content: 1 kg
- Pack information: 6 x 1 kg
- Suitable for: steel, aluminium, GRP, and wood
- GTIN: 4016176413335
Technical details
| Product type | Filler |
| Size / content | 1 kg |
| Pack information | 6 x 1 kg |
| Suitable for | steel, aluminium, GRP, and wood |
| Mixing ratio | 2:1 |
| Hardener | EPN |
| Pot life | 25 – 35 min with Mipa Härter EPN at 20 °C Spray / processing viscosity: |
| Drying / flash-off | , it can be well sanded without producing a lot of dust. It is characterized by its excellent adhesion and bending resistance |
| GTIN | 4016176413335 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
