Description
Two-component zinc phosphate epoxy acrylic primer for coating steel, zinced substrates, aluminium, GRP and e- coatings.
Product information
Its outstanding filling power and resistance to solvents and chemical agents make this product particularly suitable for high-quality coating of highly stressed installations and devices. Furthermore, this primer can be overcoated with Mipa 2K topcoats after a drying of only 20 minutes at room temperature.
Typical applications
This product is intended for professional coating work on zinced substrates, zinced steel, steel, and aluminium with a grey finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (6:1) with Mipa PU 914 -10; adjust with Mipa 2K-Thinner Pricegroup I-III if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Highlights
- Primer
- Finish / colour: grey
- Size / content: 15 kg
- Suitable for: zinced substrates, zinced steel, steel, and aluminium
- Mixing ratio: 6:1
Technical details
| Product type | Primer |
| Size / content | 15 kg |
| Finish / colour | grey |
| Suitable for | zinced substrates, zinced steel, steel, and aluminium |
| Mixing ratio | 6:1 |
| Hardener | Mipa PU 914-10 |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener-10 approx. 2,5 – 3 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| GTIN | 4016176525953 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
