Description
This is a 2-component epoxy resin primer filler for steel, zinced substrates, aluminium and GRP. Its very good spray mist absorption, fast drying and the very good flow guarantee a fast overcoatability with perfect gloss retention.
Product details
It can also be used as primer before filling work and as wet-on-wet filler. This makes the product particularly suitable for use in high-quality industrial and commercial vehicle construction.
Where does this product work best?
This product is intended for professional coating work on zinced substrates, steel, aluminium, and GRP with a white finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (3:1 by weight; 2:1 by volume) with Mipa EP 905-05; adjust with Mipa 2K-Verdünnung if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- Primer
- Finish / colour: white
- Size / content: 15 kg
- Suitable for: zinced substrates, steel, aluminium, and GRP
- Fast drying
- Gloss finish
Technical data
| Product type | Primer |
| Size / content | 15 kg |
| Finish / colour | white |
| Suitable for | zinced substrates, steel, aluminium, and GRP |
| Mixing ratio | 3:1 by weight; 2:1 by volume |
| Hardener | Mipa EP 905-05 |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener -05 approx. 5 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| GTIN | 4016176609691 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
