Description
2K epoxy topcoat for steel, zinced substrates, aluminium, GRP and mineral substrates.
Product details
Also suitable for coating floors in garages and warehouses. Learn more about application and product properties in technical data sheet Mipa EP 200-50 Floorcoat.
Where does this product work best?
This product is intended for professional coating work on zinced substrates, steel, aluminium, and GRP with a gloss finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (2:1) with Mipa EP 950-10, EP 950-25; adjust with Mipa EP-Verdünnung, Mipa EP-Verdünnung lang if required. Apply even coats and respect the flash-off, drying and recoating times of the full system.
Key features
- Industrial coating
- Finish / colour: gloss
- Size / content: 5 kg, 20 kg
- Suitable for: zinced substrates, steel, aluminium, and GRP
- Mixing ratio: 2:1
Technical data
| Product type | Industrial coating |
| Size / content | 5 kg, 20 kg |
| Finish / colour | gloss |
| Suitable for | zinced substrates, steel, aluminium, and GRP |
| Mixing ratio | 2:1 |
| Hardener | Mipa EP 950-10, EP 950-25 |
| Thinner | Mipa EP-Thinner |
| Pot life | with hardener -25 approx. 6 – 8 h at 20 °C Spray / processing viscosity: |
| Drying / flash-off | hardener object |
| Often used together with |
|
For the compatible hardener options for this product, see the linked products in the technical information table.
