Mipa EP 950-10 is the short hardener for compatible Mipa two-component epoxy primers and epoxy topcoats. The short hardener speed supports a faster curing route within the EP system when the matching coating material calls for EP 950-10.
EP 950-10 starts the chemical curing reaction of the compatible epoxy coating. The cured system develops film hardness, adhesion and resistance through the correct combination of base material and hardener.
The hardener belongs in professional coating work where an epoxy primer or epoxy topcoat needs the faster EP hardener route. Correct dosing, thorough mixing and suitable processing conditions are essential for curing and sanding or recoating behaviour.
Mipa EP 950-10 is available in 1 kg and 5 kg packs. The 1 kg pack suits smaller EP coating work, while the 5 kg pack supports repeated industrial primer and topcoat preparation.
| Product type | 2K epoxy hardener |
|---|---|
| Hardener speed | Short / fast |
| For use with | Compatible Mipa 2K epoxy primers and topcoats |
| System role | Chemical curing component |
| Available sizes | 1 kg and 5 kg |
The correct hardener choice affects pot life, curing speed and final film development. A short hardener gives a faster route than the normal-speed hardener, while the normal-speed hardener supports standard processing time within the matching system.
Mixing ratio and compatibility depend on the specific Mipa coating material. The hardener should be used only with the coating systems that list the matching PU or EP hardener route in the technical information.
EP 950-10 should be kept with the compatible epoxy material listed for that hardener route. Accurate weighing or measuring, complete mixing and suitable temperature support reliable film development, especially on primer layers that will be sanded or recoated.
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1 kg | 017510000 | 4016176425734 |
| 5 kg | 017550000 | 4016176424850 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
