Description
Mipa P 19 E styrene-free 1 l PE light filler incl. hardener is a 2K hardener for compatible Mipa 2K PU products. It is chosen to match the curing speed and processing window required by the selected topcoat or primer.
Product details
High-quality and styrene-free 2-component polyester filler using renewable raw materials for levelling depressions and unevenness in car repairs and in vehicle and mechanical engineering.
Where does this product work best?
Use this hardener only with the Mipa products it is intended for. The selected hardener influences the curing speed, handling and final durability of the coating system.
Use and processing
Add the hardener only to the matching Mipa product using the prescribed ratio (100:2). Process the mixture within the pot life and use the thinner, spray settings and drying schedule specified for the chosen base product. From +10 °C and up to 80 % relative humidity. Ensure sufficient supply and exhaust air. Polyester filler no longer hardens below +10 °C
Features
- 2K hardener
- Size / content: 1 l
- Easy sanding
- Pot life: 4 – 6 min with Mipa Härter P at 20 °C Spray / processing viscosity:
- GTIN: 4016176702309
Technical data
| Product type | 2K hardener |
| Size / content | 1 l |
| Pack information | 6 x 1 l |
| Suitable for | cars, galvanised substrates, steel, and aluminium |
| Mixing ratio | 100:2 |
| Pot life | 4 – 6 min with Mipa Härter P at 20 °C Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative humidity. Ensure sufficient supply and exhaust air. Polyester filler no longer hardens below +10 °C |
| VOC | EU limit value for the product category B / b 250 g / l. This product contains max. 25 g / l |
| GTIN | 4016176702309 |
