Description
Mipa P 20 is a laminating resin that cures quickly with benzoyl peroxide hardener. In combination with glass fabric, glass mat or unwoven fibre glass it is a high performance system to repair easily and quickly larger holes in GRP parts and car body sheets.
Product information
Mipa P 20 is also available as set (Mipa P 20 Reparatur-Set) which contains the glass fabric, brush and mixing cup.
What is this product used for?
Use this hardener when a compatible Mipa 2K-PU glass coating has to bond correctly on glass. It is intended for systems that work with Mipa 1K-Glasprimer and is best kept for the exact products listed by the manufacturer.
Use and processing
Add the hardener only to the specified glass coating system. Use Mipa 1K-Glasprimer as adhesion promoter and make sure the recoatable side of the glass has been identified before coating. Close the container immediately after use, because the hardener reacts with moisture. From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Key features
- Glass hardener
- Size / content: 1 kg
- Pack information: 6 x 1 kg
- Pot life: 10 – 15 min at 20 °C (if adding 2 % of hardener) Spray / processing viscosity:
- GTIN: 4016176031607
Technical details
| Product type | Glass hardener |
| Size / content | 1 kg |
| Pack information | 6 x 1 kg |
| Suitable for | cars, GRP, and glass |
| Mixing ratio | 100:1 |
| Pot life | 10 – 15 min at 20 °C (if adding 2 % of hardener) Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| VOC | EU limit value for this product (category B / b): 250 g / l. This product contains max. 0 g / l of VOC |
| GTIN | 4016176031607 |
