Description
Mipa P 27 is a transparent putty and body filler which has been especially developed to fill visible carbon fibre PE-transparent putty incl. PE-transparent putty incl. hardener MEKP for UV-resistant putty work e. g. on carbon surfaces or tintable for design use.
Product information
hardener MEKP for UV-resistant putty work for example on carbon surfaces or tintable for design use.
Where does this product work best?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Application notes
Mix the filler with the supplied hardener in the stated ratio (100:2). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour. From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Key features
- Body filler
- Finish / colour: transparent
- Size / content: 1 kg
- Pack information: 6 x 1 kg
- UV resistance
- GTIN: 4016176540116
Technical details
| Product type | Body filler |
| Size / content | 1 kg |
| Finish / colour | transparent |
| Pack information | 6 x 1 kg |
| Mixing ratio | 100:2 |
| Pot life | 15 – 20 min with Mipa Härter MEKP at 20 °C Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| VOC | EU limit value for this product (category B / b): 250 g / l. This product contains max. 25 g / l of VOC |
| GTIN | 4016176540116 |
