Description
Sprayable MS polymer-based seam sealant used for the reproduction of OEM finishes of common seam sealing types (spraying, beading, smoothing the beads by brush) in vehicle and container construction, shipbuilding and mechanical engineering.
About this product
Furthermore, it can be used for repairing damaged PVC coatings in wheelhouses, as stone chip protection for front and rear spoiler, as step protection in vehicles and for sealing and laminating transitions of welded sheet metal parts. Sprayable, recoatable joint-sealer for overlapping sheet metal in the engine compartment, floor plating.
Where does this product work best?
Use this product for the bonding or sealing work named on the label and always within the compatible system. It is intended for workshop jobs where controlled application and the correct working time are important.
Use and processing
Use the product only on clean, prepared surfaces and within the working time specified for the system. Apply with the appropriate gun or nozzle and allow the material to cure fully before loading the bond or sealing area. From +5 °C and up to max. +30 °C
Key features
- Adhesive or sealant
- Finish / colour: grey
- Size / content: 310 ml
Technical information
| Product type | Adhesive or sealant |
| Size / content | 310 ml |
| Finish / colour | grey |
| Suitable for | vehicles, steel, aluminium, and glass |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From +5 °C and up to max. +30 °C |
| Storage | At least 15 month in unopened original container. Protect from direct sun light. Do not store above 25 °C |
