Mipa Pre-cleaner Mat & Clean 1 kg prepares blend zones with chemical and mechanical cleaning in one step. The sanding paste removes wax, grease and silicone while creating a matt surface, so the area becomes cleaner and better prepared for intermediate adhesion. This is useful when a finish must be blended smoothly into the surrounding panel rather than treated as a sharp isolated repair edge.
The paste spreads easily and reaches difficult shapes, panel edges, contours and small recesses more effectively than a dry abrasive process alone. The result is a complete uniform satin finish without scratches. That matters in blending areas, because uneven sanding marks or polished residue can show through later or weaken the adhesion of the next layer.
Mipa Pre-cleaner Mat & Clean is especially valuable before refinishing work where contamination and surface gloss must be removed together. The abrasive and cleaning action helps reduce the number of separate preparation steps while still giving a controlled matt surface. It can support work on surrounding paint areas before blending, local repair coating and finishing preparation.
Use the paste with suitable application pads or cloths. Keep the surface clean, rinse or remove residues as required and avoid allowing contamination to remain in corners or body lines. Correct cleaning after matting is important so the prepared area is ready for the next compatible coating step.
Use Mipa Pre-cleaner Mat & Clean for blending preparation where cleaning and mattifying must happen together. It helps remove contamination, breaks surface gloss and prepares a uniform satin base for the next coating step.
| Product type | Sanding paste and pre-cleaner |
|---|---|
| Pack size | 1kg |
| Main use | Blending preparation |
| Removes | Wax, grease and silicone |
| Surface effect | Uniform matt satin finish |
| System benefit | Supports intermediate adhesion |
| Article number | 265510000 |
|---|---|
| EAN / GTIN | 4016176182583 |
Does Mat & Clean only clean the surface?
No. The paste provides chemical and mechanical cleaning in one operation, with a matt finish created at the same time.
Why is it useful for blending?
A clean, uniformly matted surface helps the blend area accept the next coating layer more evenly.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
