Description
Mipa PROTect Easy Clean is a highly effective anti-graffiti surface protection to recondition and to seal very different surfaces. Characteristic features of application and surface protection are: Mipa PROTect Easy Clean is applied in a very thin (5 – 10 µm), even layer that doesn’t require any polish.
About this product
The resulting, very thin protection film is therefore clearly visible and acts as a thin clearcoat. Although there are visible application marks due to this, for example large, weathered old paintworks can be refreshed easily and quickly and give new shine.
What is this product used for?
Use this clearcoat as the final transparent layer over compatible colour coats. The listed application areas include commercial vehicles.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Spray viscosity ready to spray where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. from 5 °C up to 30 °C, and 30% up to 80 % relative air humidity. Ensure adequate ventilation
Key features
- Specialty product
- Suitable for: commercial vehicles
- UV resistance
- Gloss finish
- GTIN: 4016176590524
Technical information
| Product type | Specialty product |
| Suitable for | commercial vehicles |
| Pot life | no pot life if stored air-tight Spray / processing viscosity: ready to spray |
| Processing conditions | from 5 °C up to 30 °C, and 30% up to 80 % relative air humidity. Ensure adequate ventilation |
| GTIN | 4016176590524 |
