Description
High-quality 2K polyurethane acrylic primer with active protection against corrosion and excellent adhesion to steel, zinced substrates and aluminium.
About this product
Recoatable with 1K and 2K paints. This product can be used as adhesion promoter, primer and filler and can also be applied wet on wet.
Where does this product work best?
This product is intended for professional coating work on zinced substrates, steel, and aluminium with a white finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (10:1 by weight; 7:1 by volume) with Mipa PU 912-10, Mipa PU 912-25, Mipa PU 900-25; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Key features
- High-quality 2K polyurethane acrylic primer
- Finish / colour: white
- Size / content: 25 kg
- Suitable for: zinced substrates, steel, and aluminium
- Corrosion protection
Technical data
| Product type | High-quality 2K polyurethane acrylic primer |
| Size / content | 25 kg |
| Finish / colour | white |
| Suitable for | zinced substrates, steel, and aluminium |
| Mixing ratio | 10:1 by weight; 7:1 by volume |
| Hardener | Mipa PU 912-10, Mipa PU 912-25, Mipa PU 900-25 |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener -25 approx |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| GTIN | 4016176088052 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
