Description
2K polyurethane acrylic monolayer with active protection against corrosion, very high gloss and fast drying in HS quality.
About this product
Particularly suitable for high-quality single-layer coating of machines, chassis, components, constructions in interior and exterior areas. Direct adhesion on steel, zinced substrates and aluminium.
Typical applications
This product is intended for professional coating work on zinced substrates, steel, and aluminium with a gloss finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (3:1 by weight; 5:1 by volume); adjust with Mipa 2K-Verdünnung V 10, V 25, V 40 if required. Apply even coats and respect the flash-off, drying and recoating times of the full system.
Highlights
- Single-coat paint
- Finish / colour: gloss
- Size / content: 5 kg, 20 kg
- Suitable for: zinced substrates, steel, and aluminium
- Fast drying
Technical data
| Product type | Single-coat paint |
| Size / content | 5 kg, 20 kg |
| Finish / colour | gloss |
| Suitable for | zinced substrates, steel, and aluminium |
| Mixing ratio | 3:1 by weight; 5:1 by volume |
| Thinner | Mipa 2K-Thinner Short V 10, Mipa 2K-Thinner Normal V 25, Mipa 2K-Thinner Long V 40 |
| Pot life | with hardener -10 approx. 1,5 h at 20 °C with hardener A 60 approx. 4 h at 20 °C Spray / processing viscosity: |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
