Description
2K acrylic topcoat in HS quality for coating trucks, commercial vehicles, truck bodies, facade components as well as highly stressed machines and constructions.
About this product
2K acrylic top coat in HS-qualitywith a solvent content of less than420 g/l. Highest surface quality, verygood resistance against chemicaland mechanical influences.
What is this product used for?
This product is intended for professional coating work on commercial vehicles with a gloss finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (2:1) with Mipa HS; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Highlights
- 2K acrylic topcoat in HS quality
- Finish / colour: gloss
- Size / content: 20 kg
- Suitable for: commercial vehicles
- Mixing ratio: 2:1
Technical data
| Product type | 2K acrylic topcoat in hs quality |
| Size / content | 20 kg |
| Finish / colour | gloss |
| Suitable for | commercial vehicles |
| Mixing ratio | 2:1 |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener -10 approx. 1,5 h at 20 °C with hardener -40 approx. 3 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| GTIN | 4016176265798 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table. Where a matching primer, basecoat, clear coat or companion system product is explicitly supported, it is also linked there. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
