Description
Mipa PU 850-10 15 kg 2K PU clear coat, matt is a 2K clearcoat with a clear, matt appearance. It is designed as the final protective layer over compatible colour coats where appearance, durability and surface protection matter.
About this product
High-quality, industrially applicable 2K-Clearcoat with excellent matt effect. Very good appearance with high chemical and mechanical resistance.
Typical applications
Use this clearcoat as the final transparent layer over compatible colour coats when a clear, matt look is required.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (3:1) with Mipa PU 985-25; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Key features
- 2K clearcoat
- Finish / colour: clear, matt
- Size / content: 15 kg
- Mechanical resistance
- Deep matt effect
- Mixing ratio: 3:1
Technical data
For the compatible thinner options for this product, see the linked products in the technical information table. Where a matching primer, basecoat, clear coat or companion system product is explicitly supported, it is also linked there. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
