Mipa PU 916-10 2K PU Hardener short is a concentrated hardener for compatible Mipa 2K polyurethane coating systems. It is used as the reactive curing component in specified Mipa PU materials, helping the mixed coating develop the intended hardness, resistance and film properties after application.
The short speed is selected where faster curing is suitable for the coating system and application conditions. Mipa PU 916-10 is not used alone and must be combined only with compatible Mipa base materials. The base coating determines the exact mixing ratio, pot life, thinner choice, application viscosity and drying schedule.
Accurate mixing is essential with 2K materials. Too little or too much hardener can affect curing, resistance and final appearance. Measure carefully, stir thoroughly and prepare only the amount that can be applied within the stated working time of the selected Mipa coating.
The 5 kg container suits repeated use with specified Mipa 2K PU systems. Keep the container tightly closed after pouring and protect the contents from moisture and contamination. Follow the safety information and the correct process for the complete coating system before use.
Check the technical data for the chosen Mipa base coating before mixing. Measure the correct quantity, stir thoroughly and apply the mixture within the stated pot life. Do not use PU 916-10 as a standalone coating material.
| Item type | 2K PU hardener |
|---|---|
| Cure speed | Short or fast |
| Container size | 5 kg |
| Compatibility | Specified Mipa 2K PU coatings |
| Mixing ratio | Defined by the matched base coating |
| Article number | 018050000 |
|---|---|
| EAN / GTIN | 4016176493139 |
No. It must match the selected Mipa coating system and the technical data for that material.
Correct hardener quantity is needed for reliable curing, resistance and final film performance.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
