Description
Mipa Rostversiegelung SMP reacts with the moisture in rust layers and thus seals and solidifies the substrate. It is only necessary to roughly remove loose rust.
Product details
Mipa Rostversiegelung SMP has an excellent penetration capacity also in thick layers of rust and stops also zinc corrosion. Shortly after the application, the rust layers are already sealed and can be overcoated with Mipa 1K or 2K primer or Mipa body filler.
Typical applications
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Application notes
Mix the filler with the supplied hardener until the colour is uniform. Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour. from +10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- Adhesive or sealant
- Size / content: 100 ml
- Suitable for: steel and aluminium
- GTIN: 4016176645651
Technical information
| Product type | Adhesive or sealant |
| Size / content | 100 ml |
| Suitable for | steel and aluminium |
| Processing conditions | from +10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | for 1 year in unopened original container |
| VOC | EU limit value for this product (category B / e): 840 g / l This product conatins max. 840 g / l of VOC |
| GTIN | 4016176645651 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
