Description
Beside its very good filling properties, this 1K wash primer provides also an active corrosion protection and excellent adhesion on steel, zinced substrates and aluminium. Recoatable with solvent- and waterborne 1K and 2K paints.
About this product
This product can be applied as primer or as primer filler. 1K etch primer with good fillingpower and active corrosion protection.
Typical applications
This product is intended for professional coating work on zinced substrates, steel, and aluminium with a redbrown finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Mipa 2K-Thinner where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- Primer
- Finish / colour: redbrown
- Size / content: 5 kg
- Suitable for: zinced substrates, steel, and aluminium
- Corrosion protection
- GTIN: 4016176168792
Technical information
| Product type | Primer |
| Size / content | 5 kg |
| Finish / colour | redbrown |
| Suitable for | zinced substrates, steel, and aluminium |
| Thinner | Mipa 2K-Thinner |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 610 g / l.* |
| GTIN | 4016176168792 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
