Mipa WBC Blend-In Additive 1 l is a colourless system component for blending Mipa WBC basecoats into the surrounding finish without creating a hard transition line. It is used during partial refinishing where the repair area has to fade cleanly into the existing surface instead of ending with a visible edge.
Mipa WBC spray paint 1 l supports a softer overspray zone and helps the colour effect settle more evenly across the blend area. That matters most in partial colour repairs, difficult transition zones and shades where visible edges or dry spray would disturb the final look. The clear drying behaviour also makes the blend area easier to judge while working.
It can be applied over the repaired section and into the outer blend zone as part of the Mipa WBC routine. In silver and effect shades, that can help reduce the visibility of fine scratches and sanding marks in the blend area and support a more uniform visual transition before clearcoat application.
This is not a standalone basecoat. This coating gives prepared parts a durable finish with the colour, gloss and protection expected from the selected Mipa coating system. That makes it a useful specialist product for blend repairs rather than full panel colour application.
The 1 litre size gives enough material for repeated partial repair use. It belongs next to the WBC colour system whenever a smooth, controlled colour transition is required at the outer edge of a repair.
| Product type | Waterborne blend-in additive |
|---|---|
| Colour | Colourless |
| Volume | 1 l |
| System | Mipa WBC |
| Use | Blend zone support for partial refinishing |
| Article number | 282520000 |
|---|---|
| EAN / GTIN | 4016176496031 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
