Description
Mipa WBS PC-Primer-Spray is a colourless adhesion promoter that is especially suited for polycarbonate substrates such as headlight lenses. Due to the water-based formulation, Mipa WBS PC-Primer does not dissolve the sensitive polycarbonate.
About this product
Colourless adhesion promoter especially adapted to polycarbonate substrates such as headlight lenses. By recoating with Mipa 2K clearcoats high quality headlight repairs can be achieved.
Where does this product work best?
This product is intended for professional coating work on plastic with a colourless finish.
Use and processing
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating.
Features
- Primer spray
- Finish / colour: colourless
- Size / content: 400 ml
- Pack information: 6 x 400 ml
- Suitable for: plastic
- Aerosol format for smaller areas and local work
Technical information
| Product type | Primer spray |
| Size / content | 400 ml |
| Finish / colour | colourless |
| Pack information | 6 x 400 ml |
| Suitable for | plastic |
| Drying / flash-off | at 20 °C Dust dry after approx. 5 – 10 min Overcoatable after approx. 35 – 45 min Processing conditions From +10 °C and up to 80 % relative humidity |
| GTIN | 4016176536331 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
