Description
This water-based 2K epoxy resin top coating for steel, zinced substrates, aluminium and common plastics can be applied by brushing, rolling or spraying.
Product information
Water-based 2K epoxy resin topcoat. Application by brushing, rolling or spraying.
Where does this product work best?
This product is intended for professional coating work on zinced substrates, steel, aluminium, and plastics with a gloss, semi-gloss finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1); adjust with Mipa WBS VE-Wasser if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation
Key features
- This water-based 2K epoxy resin top coating
- Finish / colour: gloss, semi-gloss
- Size / content: 5 kg
- Suitable for: zinced substrates, steel, aluminium, and plastics
- Mixing ratio: 5:1
- GTIN: 4016176304077
Technical details
| Product type | This water-based 2K epoxy resin top coating |
| Size / content | 5 kg |
| Finish / colour | gloss, semi-gloss |
| Suitable for | zinced substrates, steel, aluminium, and plastics |
| Mixing ratio | 5:1 |
| Thinner | Mipa WBS VE water |
| Pot life | 3 – 4 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 40 g / l |
| GTIN | 4016176304077 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
