Mipa WPU 9805-25 is the hardener specified for Mipa WPU 4005 plastic coating systems. It is made for a plastic-focused waterborne 2K PU setup rather than general topcoat use, which gives it a clear purpose in premium coating work on moulded, rigid and flexible plastic parts. When the paint system is being used on technical housings, trims, covers or shaped plastic components, the correct hardener is essential to help the coating cure as intended and build the mechanical and chemical resistance promised by the WPU 4005 line.
WPU 9805-25 is the hardener for waterborne Mipa WBS PU plastic coating WPU 4005-xx and state that it must be stirred into the paint with a mechanical stirrer. Related plastic-coating sheets show the rest of the system around it, including the usual reduction with Mipa WBS deionized water after incorporation. That exact compatibility is valuable because plastic parts often leave less room for compromise than generic metalwork: the finish has to bond correctly, process cleanly and stay durable on a substrate line that can be demanding.
WPU 9805-25 is the hardener that keeps the WPU 4005 gloss or matt plastic-coating system coherent from the moment the paint is mixed. It supports the proper pot life, curing profile and final film build that help the coating perform on indoor and outdoor plastic parts exposed to handling, cleaning and daily service. When the selected paint is WPU 4005, this is the hardener that belongs beside it.
| Product type | Waterborne 2K PUR hardener |
|---|---|
| Compatibility | Mipa WPU 4005-xx plastic coating systems |
| Application role | Hardener / curing component |
| Mixing guidance | Stir into the base paint with a mechanical stirrer |
| Pack size | 850 g |
| Article number | 015010000 |
|---|---|
| EAN / GTIN | 4016176586930 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
