Description
Mipa Zink-Alu-Spray is a high-quality zinc dust coating with high corrosion protection for use on steel and ferrous metals and is perfectly suited for refinishing hot-dip galvanised steel parts in compliance with DIN EN ISO 1461.
About this product
Since the colour shade is matched to that of the hot-dip galvanized surface, it is easier to visually adapt the repaired areas. Due to the corrosion protection properties of Mipa Zink-Alu-Spray, the coating is highly resistant to moisture and has a corrosion resistance of > 450 hours in salt spray tests according to DIN EN ISO 9227.
What is this product used for?
This product is intended for professional coating work on steel and aluminium with a silver grey finish. The 400 ml format is especially suitable for spot work, smaller areas and local repairs.
How to use
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating.
Highlights
- Aerosol coating
- Finish / colour: silver grey
- Size / content: 400 ml
- Pack information: 6 x 400 ml
- Suitable for: steel and aluminium
- Corrosion protection
Technical information
| Product type | Aerosol coating |
| Size / content | 400 ml |
| Finish / colour | silver grey |
| Pack information | 6 x 400 ml |
| Suitable for | steel and aluminium |
| Drying / flash-off | s at 20 °C Dust dry after approx. 15 min Set to touch after approx. 1 h Overcoatable after approx |
| GTIN | 4016176031966 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
