MP bodywork spatula Spreader-P 120 x 80 mm is a flexible plastic spreader for applying 1K and 2K body filler materials. The 120 x 80 mm shape gives enough surface to move filler evenly across repair areas while still remaining easy to guide around curves, edges and small panel sections.
The flexible body helps the spreader follow shaped surfaces without leaving heavy ridges. That matters during filling and remodelling work because a smoother filler layer usually means less correction during sanding. The plastic edge is also practical when a softer feel is preferred over a metal blade.
Spreader-P is useful for body filler application, small shaping work, contour repair and general filler levelling. It suits flat panels, local depressions, curved areas and detail sections where controlled hand pressure gives a cleaner layer than a rigid tool.
Use Spreader-P with freshly mixed filler and clean the edge before material cures. Keep dried filler away from the working edge so fresh material remains smooth. Apply filler in controlled passes, then allow the filler to cure before sanding.
Mix the filler correctly, place a suitable amount on the spreader and apply it with steady pressure. Clean the plastic edge after use before filler residue hardens.
| Item type | Plastic bodywork spatula |
|---|---|
| Format | 120 x 80 mm |
| Material | Highly flexible plastic |
| Main use | Filler application and remodelling work |
| Article number | 561102208 |
|---|---|
| EAN / GTIN | 4016176261097 |
Yes. Spreader-P is suitable for applying 1K and 2K body filler materials.
Flexibility helps the edge follow shaped surfaces and leave a smoother filler layer.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
