MP control powder 100 g incl. pad is a dry guide coat system for checking prepared filler and primer surfaces during sanding. The powder makes surface defects visible so sanding marks, pinholes and low spots can be found before the next coating step.
The 100 g powder with application pad is used during wet or dry sanding preparation. Black powder gives strong contrast on lighter filler or primer surfaces, while white powder supports visibility on darker grounds. The dry powder method does not clog abrasives when used correctly.
Surface checking becomes easier when defects are made visible before coating work continues. The powder helps guide sanding so the prepared surface reaches a cleaner, flatter condition before primer or paint is applied.
| Product type | Control powder with application pad |
|---|---|
| Pack size | 100 g |
| Colour | Black; white |
| Typical use | Sanding control on filler and primer surfaces |
| Option | Article number | EAN / GTIN |
|---|---|---|
| Black | 581017182 | 4016176403251 |
| White | 581017187 | 4016176501346 |
It helps reveal sanding marks, pinholes, low spots and uneven areas before the next coating layer.
The control powder set is suitable for wet and dry sanding.
The dry powder method is used because it can support surface checking without clogging abrasives when applied correctly.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
