MP Fine Dust Mask FFP1 R D is a disposable dust mask with an exhale valve for work with harmful fine dust within particle filter class 1. It is intended for preparation tasks where sanding dust and similar airborne particles can reach the breathing zone. The FFP1 R D classification gives a defined protection class instead of a general nuisance dust mask.
The exhale valve helps reduce breathing resistance during active work. The mask is light, compact and easy to keep available near sanding blocks, abrasive discs, primers and fillers. It is useful for dry preparation, cleaning dusty parts and sanding cured filler or coated surfaces when the task falls within the FFP1 class.
Correct selection of respiratory protection matters. The mask should be matched to the material, dust level and safety data for the job. For higher particle load, more hazardous materials or paint mist, a different protection class or respiratory system may be required. FFP1 R D is not a substitute for reading the relevant safety information.
Use the mask on a clean face, shape the nose area properly and check the fit before starting dusty work. Replace the mask when breathing resistance increases, when it becomes damaged or after contamination. Store unused masks dry and clean so the sealing shape remains reliable.
Place the mask over nose and mouth, adjust the nose bridge and check the seal before dusty work starts. Use only within the correct protection class and replace when damaged, contaminated or difficult to breathe through.
| Item type | Disposable fine dust mask |
|---|---|
| Filter class | FFP1 R D |
| Valve | Exhale valve |
| Standard | EN 149:2001 |
| Pack unit | 10 pieces |
| Article number | 561160800 |
|---|---|
| EAN / GTIN | 4016176163230 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
