MP FoilCutter makes masking film easier to cut cleanly before painting and preparation work. The concealed blade is designed for controlled cutting of masking foil, so the film can be separated without pulling, tearing or dragging through the covered surface. Clean cuts save time when masking larger panels, protected areas and surrounding surfaces.
A normal open knife can easily cut too deep, scratch the wrong area or leave ragged film edges. MP FoilCutter reduces that risk by guiding the cut through the foil while keeping the blade covered. This is helpful when masking needs to stay close to the repair area and the surrounding finish must remain protected from accidental blade contact.
The compact tool fits recurring masking tasks with PE masking foil and similar film materials. It can be used while laying film over panels, trimming excess material around work areas, opening film sections and cutting straight lines before tape is applied. A clean edge helps the masking sit flatter and makes the prepared area look neater before spraying begins.
MP FoilCutter is simple but useful for anyone using masking foil regularly. It improves cutting control, reduces loose torn edges and helps avoid the risky habit of cutting film with exposed utility blades near painted panels. Keep the cutting path free from hard dirt or abrasive dust, and replace the tool when cutting quality starts to drop.
Use MP FoilCutter to cut masking foil cleanly during surface protection and paint preparation. The covered blade helps make controlled cuts without exposing surrounding surfaces to an open knife edge.
| Product type | Masking foil cutter |
|---|---|
| Blade design | Concealed blade |
| Main use | Cutting masking foil |
| Safety benefit | Reduced risk of open blade contact |
| Related material | Masking foil and similar protective film |
| Article number | 562700000 |
|---|---|
| EAN / GTIN | 4016176221404 |
Why use a foil cutter instead of a utility knife?
A concealed blade improves control and reduces the chance of accidental scratches near painted surfaces.
Can MP FoilCutter be used with masking paper?
MP FoilCutter is made for masking foil. Use suitable cutting tools for heavier paper when needed.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
