MP Hand Block Soft 128 x 63 mm is a flexible manual sanding block for wet and dry sanding. The soft block helps abrasive paper follow contours and curves more naturally than a hard flat block. That makes it useful where the surface shape needs to be respected instead of flattened aggressively.
The compact 128 x 63 mm size gives good control on small panels, edges, curved areas and detail zones. It can be used during preparation, filler shaping, primer sanding and fine surface correction where hand feel is important. The flexible construction helps distribute pressure more evenly across shaped surfaces.
A good hand block keeps sanding more consistent than loose paper alone. It gives the abrasive a stable backing while still allowing the surface contour to guide the movement. That improves control when refining transitions, soft curves and small repaired sections before the next coating or polishing step.
Use the block with suitable abrasive material and match the grit to the job. Keep the sanding surface clean, rinse when wet sanding and change abrasive paper before clogged grit starts scratching. Work with even pressure and inspect the surface often so shape and edge detail stay under control.
Wrap or attach the suitable abrasive to the block, then sand with even pressure following the surface shape. Use wet or dry technique for the abrasive and coating stage, and change abrasive as soon as it clogs or loses bite.
| Item type | Soft hand sanding block |
|---|---|
| Size | 128 x 63 mm |
| Use | Wet and dry sanding |
| Main strength | Highly flexible for contours and curves |
| Article number | 56809097913 |
|---|---|
| EAN / GTIN | 4016176255119 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
