MP Logo Tape is a double-sided adhesive strip for reapplying logos and emblems on vehicle bodies. It is useful after painting, polishing, repair, panel correction or trim removal when a badge needs to be mounted neatly again. The sheet size gives enough adhesive surface for larger emblems while still allowing the required shape to be cut carefully.
MP LogoTape is a 200 x 100 mm, 10-strip item and a double-sided adhesive strip for the reapplication of logos and emblems on car bodies. The tape uses premium adhesive for permanent logo hold on the vehicle. That makes it useful for badges, manufacturer emblems, model lettering and similar trim pieces when the original adhesive layer is no longer suitable.
MP Logo Tape helps keep the finished repair cleaner because the adhesive can be cut to the emblem shape rather than applied as blobs of glue. A flat adhesive layer supports better contact, cleaner edges and a more original-looking result. The surface should be clean, dry and prepared before bonding, and the emblem should be positioned carefully before final pressure is applied. MP Logo Tape is a practical finishing item for neat badge and emblem reinstallation.
The 200 x 100 mm sheet size is practical because adhesive can be cut to suit narrow lettering as well as wider badges. Clean cutting and careful placement give a neater finish than improvised adhesive strips, especially when a visible emblem sits on freshly painted or polished bodywork.
Clean the body surface and the back of the emblem, cut the MP Logo Tape to the required shape and press the emblem into place with even pressure. Final bonding quality depends on surface cleanliness, correct positioning and suitable contact pressure.
| Product type | Double-sided adhesive logo tape |
|---|---|
| Use | Reapplication of logos, badges and emblems |
| Sheet size | 200 x 100 mm |
| Quantity | 10 strips |
| Adhesion | Permanent hold with premium adhesive |
| Article number | 581022061 |
|---|---|
| EAN / GTIN | 4016176608762 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
