MP mixing nozzles for 2K-PU adhesive are replacement static mixer nozzles for compatible two component polyurethane adhesive cartridges. Each nozzle combines the two adhesive components as material leaves the cartridge, helping the adhesive reach the repair area with a more even mix and consistent flow.
Fresh nozzles are important with 2K adhesive because material begins reacting inside the mixer once both components enter the nozzle. Reusing a cured or partly blocked nozzle can disturb flow, waste adhesive and create uneven mixing. A clean replacement nozzle keeps the adhesive bead more controlled from the first pull of the trigger.
The 10 piece pack gives enough nozzles for repeated bonding, repair and sealing tasks. It is useful when several short applications are needed, when a cartridge is paused between jobs or when a blocked nozzle needs immediate replacement before the adhesive is used again.
Attach a new nozzle to the compatible cartridge, dispense a small initial amount until the mixed adhesive flows consistently and then apply the material to the prepared bonding area. Leave the used nozzle on the cartridge after use when the adhesive instructions recommend it, or replace it before the next application.
Fit a new nozzle to the compatible 2K adhesive cartridge, dispense a small first amount until the mixed material is uniform and then apply the adhesive with the correct adhesive process.
| Item type | Static mixing nozzle |
|---|---|
| Compatibility | MP 2K-PU adhesive cartridges |
| Pack contents | 10 pieces |
| Main use | Mixing two component adhesive during dispensing |
| Article number | 266820050 |
|---|---|
| EAN / GTIN | 4016176472707 |
A nozzle containing cured adhesive should be replaced. Fresh nozzles keep flow and mixing reliable.
No. This item is the replacement nozzle pack for compatible adhesive cartridges.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
