MP spray gun filter Bag of 10 pieces contains disposable filters for straining coating material before it enters the spray gun. The filters help catch small particles, dried residue and unwanted contamination that can disturb spray pattern quality or leave marks in the finish.
Clean material flow is important for primers, basecoats, clearcoats and many industrial coatings. A small particle can block a nozzle, create a defect in the wet film or interrupt spray rhythm during a repair. Using a fresh filter during filling gives the material one more controlled cleaning step before atomisation.
The bag format keeps several filters available for repeat spraying tasks. A filter should be used once and replaced when contaminated. Reusing a dirty filter can restrict flow and defeat the purpose of straining the material. The filter also needs to match the material type and spray equipment so flow rate and filtration remain suitable.
MP spray gun filters are simple consumables, but they protect more expensive work. Clean material, clean gun parts and clean air supply all support a better coating result. The filters belong in the preparation routine before spraying, especially when material has been mixed, tinted, partially stored or poured from a container that may contain small residues.
| Product type | Disposable spray gun filters |
|---|---|
| Pack content | 10 pieces |
| Use | Filtering coating material before it enters the spray gun |
| Benefit | Reduces particle contamination and nozzle blockage risk |
| Article number | 581120090 |
|---|---|
| EAN / GTIN | 4016176527148 |
A used filter should normally be replaced once contaminated or after the material has been strained.
Even mixed or fresh material can contain small particles from lids, dried residue or containers.
No. They support clean material flow but do not replace clean cups, clean guns and correct material handling.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
