MP Touch-up pen Micro Soft medium gives very controlled paint placement where a normal brush is too broad and a spray gun is not needed. The fine yellow Micro Soft tip is made for small defects in paint and lacquer surfaces, including pinholes, tiny stone-chip marks, fine scratches, edge marks and local colour corrections after repair work. A narrow tip helps the paint reach the damaged point without flooding the surrounding finish, so the repaired area stays easier to level and polish afterwards.
The medium Micro Soft format is useful when the defect needs more material than a very fine retouching tip can carry, but still needs much more accuracy than a standard touch-up brush. The soft tip holds a small amount of coating material and releases it in a focused way, making it suitable for careful local application of basecoat, topcoat, clearcoat or other compatible touch-up material. It also helps when a tiny crater or exposed edge needs to be filled step by step rather than covered in one heavy pass.
The 100-piece box keeps enough clean tips available for repeated repair work, colour testing, small-series refinishing and detail correction. A fresh tip helps avoid dried residue, contamination and unwanted drag marks in fresh paint. The yellow colour also makes the medium type easy to identify next to other Micro Soft sizes. MP Touch-up pen Micro Soft medium is a simple but useful finishing aid for anyone who wants neater small-area correction without turning a minor defect into a larger repair.
Use MP Touch-up pen Micro Soft medium for precise local retouching after sanding, polishing, spot repair or colour application. It works best on very small marks where controlled placement matters more than speed, especially on chips, pinholes, edges, narrow details and tiny imperfections that need a clean correction before final finishing.
| Product type | Micro Soft touch-up tip |
|---|---|
| Colour coding | Medium, yellow |
| Quantity | 100 pieces |
| Use | Accurate retouching of small paint and lacquer defects |
| Best suited for | Pinholes, small chips, edge marks, fine touch-ins and detail correction |
| Article number | 581017029 |
|---|---|
| EAN / GTIN | 4016176425642 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
