MP WBS floor dust binder 10 l is a water based liquid with static effect for reducing dust circulation. It binds dust particles on floors in paint booths, preparation areas and other dusty spaces, helping loose particles stay down instead of moving through the air and settling on freshly prepared or coated surfaces.
Dust control is important before coating, sanding clean up and finishing. A floor dust binder does not replace cleaning, filtration or surface preparation, but it helps reduce the movement of loose floor dust in areas where people, airflow or equipment can stir particles into the working zone.
The floor dust binder is usable on grates and sprayable with a pump sprayer. That makes it practical for flat floors, grated areas and spaces that need quick dust suppression before sensitive coating or finishing steps continue.
Apply the material evenly to the target floor or grate area. Avoid applying it to the workpiece itself. Keep walkways safe, prevent puddling and reapply as needed when dust binding effect decreases or the surface becomes contaminated again.
Apply evenly with a suitable pump sprayer or compatible method, keeping the material on the floor or grate area. Avoid puddles and keep the treated surface safe for movement.
| Item type | Water based floor dust binder |
|---|---|
| Content | 10 l |
| Effect | Static dust binding |
| Application | Sprayable, for example with pump sprayer |
| Article number | 581015010 |
|---|---|
| EAN / GTIN | 4016176483789 |
No. It is for floor dust control and must not replace surface cleaning on the part being coated.
It is usable on grates.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
