Description
Water-based 2K epoxy resin zinc phosphate primer for steel, zinced substrates, aluminium and common plastics. It can be applied by brushing, rolling or spraying and is recoatable with all water- or solvent-based 1K and 2K topcoats.
Product information
Typical substrates or application areas mentioned for this item include zinced substrates, steel, aluminium, and plastics.
What is this product used for?
This product is intended for professional coating work on zinced substrates, steel, aluminium, and plastics.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1) with Mipa WEP 9500-25 WBS 2K EP Hardener; adjust with Mipa WBS VE-Wasser if required. Apply even coats and respect the flash-off, drying and recoating times of the full system.
Highlights
- Water-based 2K epoxy resin zinc phosphate primer
- Size / content: 5 kg, 20 kg
- Suitable for: zinced substrates, steel, aluminium, and plastics
- Mixing ratio: 5:1
Technical information
| Product type | Water-based 2K epoxy resin zinc phosphate primer |
| Size / content | 5 kg, 20 kg |
| Suitable for | zinced substrates, steel, aluminium, and plastics |
| Mixing ratio | 5:1 |
| Hardener | Mipa WEP 9500-25 |
| Thinner | Mipa WBS VE water |
| Pot life | 3,5 h at 20 °C Spray / processing viscosity: |
| Drying / flash-off | hardener object |
| Often used together with |
|
For the compatible hardener options for this product, see the linked products in the technical information table.
