Description
This water-based 2K epoxy resin top coating for steel, zinced substrates, aluminium and common plastics can be applied by brushing, rolling or spraying.
Product information
Water-based 2K epoxy resin topcoat. Application by brushing, rolling or spraying.
Typical applications
This product is intended for professional coating work on zinced substrates, steel, aluminium, and plastics with a gloss, semi-gloss finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1); adjust with Mipa WBS VE-Wasser if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation
Key features
- This water-based 2K epoxy resin top coating
- Finish / colour: gloss, semi-gloss
- Size / content: 5 kg
- Suitable for: zinced substrates, steel, aluminium, and plastics
- Mixing ratio: 5:1
- GTIN: 4016176266405
Technical information
| Product type | This water-based 2K epoxy resin top coating |
| Size / content | 5 kg |
| Finish / colour | gloss, semi-gloss |
| Suitable for | zinced substrates, steel, aluminium, and plastics |
| Mixing ratio | 5:1 |
| Thinner | Mipa WBS VE water |
| Pot life | 3 – 4 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 40 g / l |
| GTIN | 4016176266405 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
