Pro Mix Industry CN 200-10 Nitro Combination Topcoat Matt Base Pack 5 kg is a fast drying 1K nitro acrylic base pack within the Mipa Pro Mix Industry system. It is intended for creating mixed CN 200-10 coatings with a matt finish when the correct colourants, reducers and processing instructions are used.
CN 200 is suited to industrial coating tasks where quick handling and a straightforward 1K system are needed. The matt finish gives a low sheen surface for parts and equipment where glare reduction or a restrained technical appearance is preferred. It is especially useful for components that need fast coating flow through the process without a two component hardener step.
This base pack is not a ready mixed colour by itself. It belongs in the Pro Mix Industry mixing process and must be combined to the formula for the required shade and use. Correct substrate preparation, compatible primer selection and film build remain essential for durability.
Use CN 200-10 only within its intended Mipa system. Mix accurately, stir thoroughly and adjust viscosity for the application method. Apply to prepared and compatible substrates, observe flash off and drying conditions, and confirm the coating build before the part is put back into service.
Prepare the substrate and primer system first. Mix the base pack to the Mipa formula, adjust viscosity as specified and apply under suitable temperature and ventilation conditions.
| Item type | 1K nitro acrylic combination topcoat base pack |
|---|---|
| System | Pro Mix Industry CN 200-10 |
| Finish | Matt |
| Content | 5 kg |
| Article number | 176550000 |
|---|---|
| EAN / GTIN | 4016176146165 |
No. It is a base pack for the Pro Mix Industry mixing system.
CN 200 is a 1K nitro acrylic system. Follow the CN 200 technical data for the correct thinner and application method.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
