Pro Mix Industry CN 200-30 Nitro Combination Topcoat Satin Matt Base Pack 5 kg is a 1K nitro acrylic base pack within the Mipa Pro Mix Industry system. It is used to create satin matt CN 200 industrial coatings when mixed to the formula and processed with the correct thinner and application settings.
The satin matt finish gives a softer sheen than gloss while still leaving a finished technical surface. CN 200-30 is useful for prepared industrial parts, equipment, frames, housings and components where a fast drying 1K coating is preferred and the required appearance is restrained rather than highly reflective.
This material is a base pack, not a ready mixed colour. The final shade and application setup come from the Pro Mix Industry formula, the selected pigment components and the technical data. Correct primer choice and substrate preparation remain decisive for adhesion, corrosion protection and durability.
Process CN 200-30 only within the intended system. Mix accurately, stir until uniform and adjust spray viscosity as specified. Apply to clean, prepared and compatible substrates, allow the necessary flash off and drying time, and avoid heavy layers that can slow drying or disturb the final finish.
Prepare the surface, mix to the Mipa formula and apply under suitable conditions. Follow the technical data for thinner, viscosity, film build and drying time.
| Item type | 1K nitro acrylic combination topcoat base pack |
|---|---|
| System | Pro Mix Industry CN 200-30 |
| Finish | Satin matt |
| Content | 5 kg |
| Article number | 176350000 |
|---|---|
| EAN / GTIN | 4016176146172 |
No. It is a base pack for the Pro Mix Industry mixing system.
Satin matt gives a low to medium sheen, less reflective than gloss but not completely flat.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
