Description
This 2K polyurethane wet-in-wet filler can be overcoated already after approx.
Product information
15 minutes without loss of gloss. Especially developed for commercial vehicle construction.
Where does this product work best?
This product is intended for professional coating work on commercial vehicles.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1 by weight; 4:1 by volume) with Mipa PU 912-xx; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Key features
- Primer
- Size / content: 20 kg
- Suitable for: commercial vehicles
- Gloss finish
- Mixing ratio: 5:1 by weight; 4:1 by volume
- GTIN: 4016176377392
Technical details
| Product type | Primer |
| Size / content | 20 kg |
| Suitable for | commercial vehicles |
| Mixing ratio | 5:1 by weight; 4:1 by volume |
| Hardener | Mipa PU 912-xx |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener -10 approx. 2 h at 20 °C with hardener -40 approx. 8 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 350 g / l.* |
| GTIN | 4016176377392 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
