Mipa 2K Transparent Sealer is a colourless 2K adhesion promoter for sound coated surfaces that do not need to be fully sanded before the next paint step. It is designed for repainting work, lettering jobs and other situations where clean adhesion is needed on existing paint without turning the whole job into a sanding-heavy process. The clear film keeps the surface visually neutral, which is useful when the existing finish must stay visible until the next layer goes on.
In daily refinishing work, this sealer fits the stage between careful cleaning and the next coat. It helps create a reliable base on sound old paintwork, especially on areas that are awkward to sand thoroughly, such as narrow returns, edges, recesses and parts around installed trim or lettering. Mipa 2K Transparent Sealer is also useful when putty patches or repaired sections need to be isolated before overcoating. Because the film is clear and thin, the job stays controlled and the surface does not pick up unnecessary build.
Mipa 2K Transparent Sealer works in a 2:1 ratio and is used with Mipa 2K MS hardeners. A small thinner addition can be used when needed, but the main strength of Mipa 2K Transparent Sealer is not complexity. It is the way it simplifies the transition from prepared old paint to a fresh topcoat. That makes it especially attractive in refinishing work where time, surface control and economy all matter. Instead of sanding every sound coated area back more aggressively than necessary, the sealer allows the work to stay focused on the parts that actually need repair and levelling.
How is it used? Mipa 2K Transparent Sealer is used after the existing coating has been cleaned and assessed as sound and recoatable. It is suited to repainting work, lettering application and overcoating on areas where separate sanding is limited, awkward or inefficient. The clear film is also useful as an insulating layer over repaired spots before the following paint stage. In practical refinishing terms, it belongs where clean adhesion, a low-build sealing layer and a more direct route into the next coating step are more useful than a traditional opaque primer.
| Product type | Colourless 2K adhesion promoter |
|---|---|
| Colour | Colourless |
| Mixing ratio | 2:1 |
| Compatible hardeners | Mipa 2K-MS-Hardener MS 10, Mipa 2K-MS-Hardener MS 25, Mipa 2K-MS-Hardener MS 40 |
| Thinner | Mipa 2K-Thinner, 0 to 5% |
| Dry film thickness | 20 to 30 µm |
| Recoatable at 20 °C | 15 to 20 min |
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1 l | 227010000 | 4016176093681 |
| 3 l | 227030000 | 4016176150070 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
