Mipa P 90 Easy incl. hardener PE filling compound is an easy sanding polyester filler for shaping repair areas before primer and coating. The filler is made for dents, uneven surfaces and body repair contours where a stable sandable filler build is required.
P 90 Easy is valued for the sanding stage. A filler that sands cleanly makes it easier to refine the repair without leaving heavy scratches or hard edges in the surrounding area. That matters for vehicle repair, restoration, GRP repair and prepared metal surfaces where the final coating depends on a smooth foundation.
The included hardener completes the repair set and activates curing after mixing. Proper mixing is essential because PE filler needs the correct hardener amount to cure evenly. A uniform mixture, clean substrate and correct application thickness help the filler develop dependable sanding behaviour and repair strength.
Mipa P 90 Easy should be used as part of a complete repair build. After curing and sanding, the repair should continue with the suitable finer filler if needed, then primer, surfacer and coating materials. P 90 Easy is not a finish coating. It is the shaping layer that helps create the right surface before the coating system begins.
| Product type | PE filling compound |
|---|---|
| Hardener | Included |
| Main use | Dents, unevenness and repair shaping |
| Key benefit | Easy sanding |
| Repair stage | Before primer, surfacer and coating materials |
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1 kg | 288110000 | 4016176076509 |
| 2 kg | 288120000 | 4016176081251 |
| 250 g | 288150000 | 4016176081992 |
P 90 Easy is mainly for shaping and filling. A fine filler may still be used for pinholes or final skim work.
The hardener activates curing after mixing.
No. After sanding, the repair should be covered with the correct primer or coating build.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
