Mipa P 99 Multi Star combines high build filling power with a fine finishing character, so one filler can handle both levelling and final surface correction. The beige polyester filler adheres to steel, zinc coated steel, aluminium, tinned surfaces, wood and GRP. That broad substrate coverage makes it useful for vehicle repair, restoration, GRP work, panel correction and surface preparation where a stable filler layer is needed before primer or further finishing.
The filler is designed for short drying time and easy sandability. After mixing with Mipa Härter P at the specified 100:2 ratio by weight, P 99 Multi Star gives a short working time and then sands quickly. That balance is important when a repair needs enough open time for accurate spreading but must not stay soft for too long before shaping. The fine consistency helps with small irregularities, shallow dents, transition zones and finishing areas where a coarse filler would leave too much sanding work.
Mipa P 99 Multi Star is especially useful when a repair needs both build and surface refinement. It can fill uneven areas, level edges and create a smooth base for the next coating stage. The beige colour also makes the worked area easy to see during sanding, which helps with contour control and final inspection before primer.
Correct mixing is important. Too little hardener can delay curing, while too much hardener can affect sanding and finish quality. Clean, dry and properly prepared substrates give the best adhesion. Once cured and sanded, P 99 Multi Star supports a cleaner repair shape with less unnecessary filler layering.
Use Mipa P 99 Multi Star for filling, levelling and finishing repair areas on compatible metal, wood and GRP substrates. The fine filler structure helps create a smooth sanded surface before primer or further paint preparation.
| Product type | PE high build body filler and finishing putty |
|---|---|
| Colour | Beige |
| Hardener | Mipa Härter P |
| Mixing ratio | 100:2 by weight |
| Pot life | 3 to 4 minutes at 20 °C |
| Sandable | Approx. 20 minutes at 20 °C, 5 minutes at 60 °C, 4 to 5 minutes with infrared drying |
| Suitable substrates | Steel, zinc coated steel, aluminium, tinned surfaces, wood and GRP |
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1 kg | 288210000 | 4016176036411 |
| 2 kg | 288220000 | 4016176081244 |
Can Mipa P 99 Multi Star be used as a finishing putty?
Yes. P 99 Multi Star works as both a body filler and putty, so it is suitable for filling and finishing tasks.
How much hardener is needed?
The mixing ratio is 100:2 by weight with Mipa Härter P.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
